™"Windancer Wind Chimes"
A.K.L. Crafts Company
BEFORE AFTER
This Stannard wind chime was not in too bad of shape for the shape it was in. What I did was to dis-assemble completely,
removed the wire nails and drilled a hole pattern to re-assemble.
Next all wood parts were sanded down and totally re-stained and two coats of spar-urethane.
Just like new again!
A customer sent these five chimes in to be totally re-furbished,
this is the first five chimes of thirty wind chimes in her collection.
The end results
05/27/2011
Completed Re-Furbishing
Tubes Polished & All New Wood Parts Re-Strung
Totally refurbished to a new condition
Chime was in poor
Parts have been totally re-furbished to like new again
condition when it arrived here from Tennessee
Re-Strung using
2.0 MM Cord
Re- Strung
Totally refurbished J.W. Stannard Chime
Pots and Pans
Totally Refurbished
Both of these chimes were made by Catskill Mtn. Wind Chimes in Woodstock N.Y.
Pats Chimes from Kentucky.
Just in from Oregon, Moss covered tubes and all!
Finished and headed back home!
Colorado Bound Back Home
This is the usual condition of most mini chimes when they come in for total refurbishing. To the right is the end result.
Just in from Scottsdale AZ. (Left)
Totally Refurbished, looks like new again!
1 1/4" O.D. Tubes and all new wood parts.
Desk top chimes
wood was re-finished and re-strung.
Headed back home to Scottsdale
Just like new again.
Headed back home to Phoenix
E-Mail Us With Comments, Suggestons Or Questions To:
or Call / Text To: 1-903-271-3829